Chantland Model 4260 Bulk Bag Filler

Made in the USA

The Chantland Model 4260 is a FIBC (bulk bag) filler that can be either a non-weigh, a gross weight or a net weigh bagger used to fill open mouth bulk bags, totes, Gaylord boxes, proboxes or drums with free flowing dry pellets, flakes, granules or powdered products such as seeds, grains, chemical powders, concrete blends and similar materials. The Model 4260’s modular design is configurable to fit any application from basic manual non-weighing machines used for dust collection or basic pack off lines, to a fully automated system that dispenses the empty pallet, fills the bag to the correct weight, discharges the filled bag and indexes the filled bags for transfer to storage area. Gross weigh models can fill up to 30 (2,000 lb.) super sacks/hr. and net weigh models can fill up to 40 (2,000 pound) super sacks/hr.

Bulk Bags: The strap hangers move to allow easy access for the operator to position the empty bag. An inflatable neck seal secures the bag fill neck and prevents dust escape. The bag fills upon operator command and when the appropriate weight is achieved, the bag is lowered to a waiting pallet and released for removal by fork-truck or conveyor.

Tote boxes: A single empty box positioned under the fill spout will be charged with product until the correct weight is achieved. If settling, or dust collection is required these features will be incorporated. Fork-truck or conveyor can remove filled boxes.

Drums: A single pallet with four drums is positioned in the filler. The scale recognizes, and tares the weight to show zero. The drum arm and hood are manually positioned over the first drum to be filled. When ready, the drum fills to the correct weight and the fill stops. At this time the hood can be moved to the next drum and upon operator command, the drum weight will tare to zero and another drum will fill to weight. This process can be repeated to fill all drums on the pallet.